Author Topic: Favorite Way to Tie Trucker's Hitch  (Read 210442 times)

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Getting there...
« Reply #165 on: January 22, 2013, 01:54:33 PM »
or do you think I am missing something?
Yes, but I'm determined to show you the light.

Yes, I do agree with you that the man pushes the bight in through side 2.
Excellent.  Now let's compare your two pictures from Reply #208.  Please refer to the first picture for which you say, "The first one is what I call 'single twist.'" I'll refer to that as "Andy #1."  Let's compare Andy #1 to the first Lee picture, "Lee #1," from Reply #219.  In Andy #1, a single, 180 degree, clockwise twist has already been performed.  The nip is identical to that in Lee #1.  Side 1 and Side 2 are as I defined in Reply #221.  In Andy #1, Side 1 is facing to the right and Side 2 is facing to the left.  Your right hand has entered the nip through Side 1 and is about to grab the bight.  You are about to pull the bight through Side 2.

Your bight enters the nip through the same side as it did for Lee.  The result is a single nip, identical to that in a Bowline, with the "rabbit"/bight entering the nip in the same way.

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
And the wheels of the bus go round and round...
« Reply #166 on: January 22, 2013, 02:56:26 PM »
but if you analyze Lee's video and my video, you will notice that Lee's Half Hitch lock goes around (what I consider to be) the wrong way.

I do NOT agree.

As I understood you, all along you have been using the term "topologically equivalent" to refer to Lee's combo as being equivalent to ABOK #173.  As I now understand, ABOK #173 involves two nips, a la a Clove Hitch, like the Asian fellow, the Australian fellow on the porch, and TMCD's description in Reply #181.  As Andy has asserted to you several times, Lee does not explicitly tie a two nip, ABOK #173, formation.

"Mathematically," what does Lee tie?  I submit that he ties ABOK #172 + half hitch lock with the bight.  With the direction Lee ties the bight, all along I agreed with you that it is "topologically equivalent" to a Clove Hitch.  But if you are now saying he goes around the WRONG way, I do not see it as "topologically equivalent" or I do not understand your use of that term.

[This will be hard for me to explain.]

Lee's nip:  Equivalent to a Bowline nip, the nip is formed with the running part passing OVER and to the LEFT of the standing part.

Lee's half hitch lock:  The bight passes behind the standing part from right to left, comes around passing OVER and to the RIGHT of the standing part.

In other words, there is one pass (with a single leg) over and to the LEFT of the standing part, and one pass (with the two legs of the bight) over and to the RIGHT of the standing part, just like a Clove Hitch.  Going around in the opposite direction results in a topologically equivalent Cow Hitch.  As I said, I've tried both directions (in small climbing rope around the handles of my desk drawers).  Neither seemed advantageous but I'll stick with Lee's directions, since I can visually see the Clove Hitch formation.  (Note:  when I refer to Clove Hitch here, I am not referring to the explicit two nip Clove Hitch formation of ABOK #173.)
« Last Edit: January 22, 2013, 03:16:02 PM by Keystoner »

Andy

  • Exp. Member
  • ****
  • Posts: 134
  • Five Knots a Day keeps Alzheimer's Away
    • My Selection of Most Useful Knots
Re: Trucker Hitch: Favorite Way to Tie
« Reply #167 on: January 22, 2013, 09:00:28 PM »
Hello Keystoner,

Thank you for trying to illuminate me.
Please allow me to respond, and perhaps reciprocate?

Quote
You are about to pull the bight through Side 2.

Yes, that's right, that's what happens on picture #1: I push the bight through Side 1 and pull out of Side 2.

But that is not what happens in the video.

For what happens in the video, let us quote you from reply 221:
Quote
If you follow the video closely, you will see that Lee pushes the bight through Side 2 and out through Side 1.

In other words, per this quote, you see Lee doing the opposite of what you see me doing in picture 1 (per the first quote).

Now may I please ask you to consider the statement "Lee pushes the bight through Side 2 and out through Side 1": I propose that this is exactly what happens in Picture #2: I push the bight through Side 2 and pull it out of Side 1.

As you said yourself, on Picture #1, the part facing me is Side 1. Therefore on Picture #2, Side 1 is at the back. The bight enters Side 2 and comes out of Side 1. Same as what you see Lee doing.

Hope all is well in Chicago.

Wishing you a relaxing evening,

Andy
my selection of most useful knots

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Baby Steps
« Reply #168 on: January 22, 2013, 10:28:27 PM »
Hello Mate,

Quote
You are about to pull the bight through Side 2.

Yes, that's right, that's what happens on picture #1: I push the bight through Side 1 and pull out of Side 2.

I don't know if you know much about Chicago politics, but you'd fit right in.  That was pretty slick the way you turned that on me.

No, you are about to pull with your right hand/push with your left hand the bight through Side 2 and pull with your right hand out Side 1.

Since I know you disagree, you must have disagreed with me when I wrote this:
Quote
In Andy #1, Side 1 is facing to the right and Side 2 is facing to the left.  Your right hand has entered the nip through Side 1 and is about to grab the bight

We really can't proceed unless we agree on the nomenclature/sign convention.  Take a vertically standing line and hold it in front of you with your left hand.  With your right hand, grab the line and twist forward 180 degrees, forming the classic Bowline nip ("hole" if you will, but I now find that term particulary amateurish) which now sits to the right of the vertically standing line.  You are facing Side 1 of the nip.  Side 2 faces away from you.

Do you agree that I have not changed my sign convention?  Do you agree that what you see is identical to Lee #1?  Do you agree that in Andy #1, which is viewed from the right side, your right hand has entered the nip through Side 1 and has exited through Side 2?

If you don't agree with all those questions, I may just have to go on Walkabout to figure out another tact with you.   ;D

Sweeney

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 998
Re: Trucker Hitch: Favorite Way to Tie
« Reply #169 on: January 22, 2013, 10:35:37 PM »
When I watched the original video several times I also concluded that there was a double twist BUT it's a bit like reading something and seeing what you expect rather than what's actually written. In the video the nipping loop is the opposite way round to the way I naturally tie it (in fact I found it quite awkward to replicate) so that the nipped bight has to be inserted from the back - achieved by twisting the nipping loop - or else there would be no nip at all as Knot4U has said repeatedly - and I owe him an apology for looking but not seeing.

I'll stick to the span loop though and bow out of this discussion now!

Barry

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: And the wheels of the bus go round and round...
« Reply #170 on: January 22, 2013, 11:56:22 PM »
Please watch the Lee video again and tie exactly what he ties.  Note, I went through the pain of making my own video specifically because Lee ties the Cow Hitch formation, unfortunately.
Trust me, out of respect for you, the whole double/twist discussion, and for my own knowledge, I have EXHAUSTIVELY watched Lee's video and yours.  Remember I noticed that you and Lee tied your bight in opposite directions?  I watched that thing so many times that I cannot let it go with Andy either.  I'd rather not get into a drawn out discussion with you about what you and I now disagree regarding Lee's video, but I maintain that *your* video demonstrates a topologically equivalent Cow Hitch.

With which part of this do you disagree:
Quote
Lee's nip:  Equivalent to a Bowline nip, the nip is formed with the running part passing OVER and to the LEFT of the standing part.

Lee's half hitch lock:  The bight passes behind the standing part from right to left, comes around passing OVER and to the RIGHT of the standing part.

As you know, a Granny is topologically equivalent to a Clove, which is like ABOK #173, which is the most desirable knot formation for this style of Trucker Hitch in my opinion.  See my video and the video of the Australian guy on his porch.

In contrast, a Square is topologically equivalent to a Cow, which is like what Lee ties in his video.  If Lee had taken the bight ear the other way around the standing end, then he would have tied ABOK #173.

I'm a knot hack but I understand everything you said here.  I understand what you mean by "topologically equivalent."  However, I think it is very misleading, and confusing to novices, to equate [ABOK #173] '=' [(ABOK #172) + (Half-Hitch lock)], even though I agree that '=' (equals sign with quotation marks) means "topologically equivalent" (provided the Half Hitch lock is taken around correctly).  To me, properly, [ABOK #173] = [Two Half Hitches] = [Clove Hitch] = [Two Nips], with no quotation marks around the equals sign.

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: Trucker Hitch: Favorite Way to Tie
« Reply #171 on: January 23, 2013, 12:31:33 AM »
Just so we're clear, I'm certain in my video I tied the Clove Hitch version (ABOK #173).  You are certain I did not.

Also, I am certain Lee is tying the Cow Hitch version.  You are certain he is not.

The discussion on this issue can't go any further if we are at polar opposites on this fundamental concept.
Thank God!

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: Trucker Hitch: Favorite Way to Tie
« Reply #172 on: January 23, 2013, 12:53:08 AM »
Are you aware that in order to see the Clove (or the Cow), you must pull the bight up straight such that the standing end is doing the wrapping around?  If you leave the knot as it looks in my video, it's about impossible to see the Clove.

No, I was not aware.  I'm trying to see this.  Are you pulling the bight up straight after you tied the locking half hitch with it?  I don't know how to visualize the standing part going around the bight at this point.  The bight is going around the standing part.  The only time I see the standing part going around the bight is with the single nip.
« Last Edit: January 23, 2013, 01:27:43 AM by Keystoner »

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
How did I miss this?
« Reply #173 on: January 23, 2013, 01:20:48 AM »
so that the nipped bight has to be inserted from the back [emphasis added]

Yes!

"back" = Side 2

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: Trucker Hitch: Favorite Way to Tie
« Reply #174 on: January 23, 2013, 01:53:58 AM »
I leave the bight as shown in my video.  I'm just saying that if you want to see the Clove you have to pull the bight straight so that the bight passes through the Clove on the standing end. 

This is where you are very misleading.  Although your TH may be "topologically equivalent" to this enlightening-to-me ABOK #173 figure, it does not look like that at all since you actually pictorially tie [(ABOK #172) + (a Locking Half Hitch)].
« Last Edit: January 28, 2013, 02:31:04 AM by Keystoner »

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: Trucker Hitch: Favorite Way to Tie
« Reply #175 on: January 23, 2013, 02:14:20 AM »
Here is ABOK #172 (the Bell Ringer):


The nipping loop in the above figure would be formed with a counterclockwise right hand twist.  Lee's ABOK #172 nip is formed with a clockwise right hand twist.  [You don't need to repeat your consistency argument with respect to counter/clockwise.  I understand that.]

In your video, you tie your nip in the same direction as Lee.  You tie your locking half hitch in the opposite direction as Lee.

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Re: Trucker Hitch: Favorite Way to Tie
« Reply #176 on: January 23, 2013, 02:38:52 AM »
Exactly, and everything else I said above stands.

Now we're back to...
Quote
The discussion on this issue can't go any further if we are at polar opposites on this fundamental concept.
and I don't see any point to continue.  Do you?

Andy, where are you?

Keystoner

  • On Walkabout
  • Full Member
  • ***
  • Posts: 96
Persistent little feller, eh?
« Reply #177 on: January 23, 2013, 02:55:38 AM »
I leave the bight as shown in my video.  I'm just saying that if you want to see the Clove you have to pull the bight straight so that the bight passes through the Clove on the standing end. 

This is where you are very misleading.  Although your TH may be "topologically equivalent" to this enlightening-to-me ABOK #173 figure, it does not look like that at all since you actually pictorially tie [(ABOK #172) + (a Locking Half Hitch)].

I think you are having an epiphany.  You have just described the knot in my video precisely.

If you go way back and read the original post, you'll see that one of my favorites is the following:

Bell Ringer + Half Hitch Lock (ABOK #173)

A Bell Ringer is ABOK #172.  In other words, ABOK #173 is topologically equivalent to ABOK #172 + a Half Hitch Lock.  The reason I say "Half Hitch Lock" is because I want to distinguish my dressing from the dressing shown for ABOK #173.  However, I also want people to notice that adding a Half Hitch Lock is equivalent to ABOK #173 once you move things around a bit.

Check, check, check, check.

Yet your video demonstrates a Cow Hitch.  We can agree to disagree, you know?

Andy

  • Exp. Member
  • ****
  • Posts: 134
  • Five Knots a Day keeps Alzheimer's Away
    • My Selection of Most Useful Knots
Lee twists twice to produce a "single twist"
« Reply #178 on: January 23, 2013, 11:48:48 AM »
Hi Keystoner, hi Knot4U,

Sorry about the delay, out all day.
Gentlemen, I have good news: a resolution (I hope) of the single vs double twist question.

By looking at the two pictures below, I had an epiphany.
They are the picture of my single twist (the shape I produce with one single clockwise twist of my right hand), and the picture of what the man produces with one single twist of his right hand. I had always assumed that these are the same (we both seem to be doing the same motion in a clockwise direction). Looking closely at the two pictures, I see that they do not show the same loop. [Edit to clarify:] On mine, the "down rope" crosses behind. On his, it crosses in front.

1. I now see that I was wrong about the morphology of what the man is tying, and that you both were right about that. He produces what I have been calling the "single twist".


The reason is quite subtle, and, not to diminish your "rightness" about the overall question in any way, there is one fundamental aspect where I believe I was at least as right as you guys, and I believe this was the source of the problem:

2. To produce the "single twist", the man twists twice---nearly exactly the motion I use for the double twist.


I believe this is the source of the confusion.
Believe it or not, this whole confusing discussion may therefore be a story of wasted motion (or, since "wasted" can antagonize, "different motion"): all along, with a single twist, we have been producing different loops, and therefore talking about different things.

Lee twists twice to produce my single twist. Do you guys also twist twice? You must do, as you have said that you do what he does? Please come forward, I have given you the cake and changed my mind about the morphology produced, as I always said I would do the second I was convinced.

For the record, here is the "single twist" motion that produces my "single twist" on my picture below, which differs from where the man is after one twist, and is in fact his double twist.

When I grab the rope to make my first twist, I sweep my right forearm counterclockwise. The elbow points away, and the right hand points towards me. The right hand's fingers crosses the rope from the left, except for the thumb, which stays on the left side, creating a fulcrum opposite the four fingers which grab the rope from the other side. The hand twists clockwise, and we have what I have been calling a "single twist". I am so used to this gesture that I never considered that a single clockwise twist might be producing a different structure. Will post pictures in the next post.

You guys weren't mad that the man on the video produces a "single twist" (I thought you were).
And I wasn't mad that he twists twice (in what looks like my "double twist").

I am amazed that we didn't get here sooner. How very odd that it took all this time.
Glad indeed to have that resolved! I was on the verge of pulling my hair a few times and I'm sure some of you were too. :'(
Thank you all for your patience. I'm sure we all learned something on this ride, whether about knots or about the challenge using words to make each other see the same thing.

Wishing you all a beautiful day,

Andy
« Last Edit: January 23, 2013, 12:13:14 PM by Andy »
my selection of most useful knots

Andy

  • Exp. Member
  • ****
  • Posts: 134
  • Five Knots a Day keeps Alzheimer's Away
    • My Selection of Most Useful Knots
My single twist
« Reply #179 on: January 23, 2013, 11:50:50 AM »
My single twist (what the man does in two twists). This gesture is so natural and ingrained I don't even think about it.

Sorry about the "late night" quality of these pictures.
my selection of most useful knots

 

anything